How to Reset Electric Fireplace Using the Reset Button

Electric fireplaces have become a popular choice for adding warmth and ambiance to homes without the hassle of traditional wood-burning fireplaces. However, like any electronic device, they may encounter occasional glitches or malfunctions. One of the simplest and most effective ways to address these issues is using the electric fireplace reset button.

In this article, we’ll guide you through the step-by-step process of resetting your electric fireplace to get it back up and running smoothly.

Where is the Electric Fireplace Reset Button Located?

The reset button is typically located on the control panel, found on the front or side of the electric fireplace unit. Look for a small button labelled “Reset” or a similar term. The reset button is typically a recessed button requiring a small, pointed object like a pen or paperclip to press.

Many electric fireplace manufacturers provide electric fireplace reset button on the remote control for the convenience of their customers. If you locate the reset key, you’re all set to reset your heating unit. Simply hold down the reset button for approximately 30 seconds.

In some electric fireplace models, the flame button can also work as a reset button. Press the flame button several times to initiate the reset. However, it is strongly recommended that you consult your product manual or seek advice from a professional expert before attempting this to avoid any potential complications.

Electric Fireplace Reset Button

How to Reset Your Electric Fireplace?

There are three methods to reset an electric fireplace to its default settings:

  1. Utilizing the Reset Button
  2. Employing the Unplug and Plug Technique
  3. Change setting to default Manually.

Reset With Electric Fireplace Reset Button

1. Locate the Reset Button

If you’re facing an issue with your electric fireplace, the first step is to locate the electric fireplace reset button. The reset button is typically on the control panel, found on the front or side of the fireplace unit.

It is designed to serve as a quick fix for minor technical glitches.

2. Power Off the Fireplace

Before pressing the reset button, ensure the electric fireplace is powered off. This can be done using the remote control or the power button on the control panel.

It’s crucial to ensure that the unit is completely turned off to prevent any potential electrical hazards during the reset process.

3. Press and Hold the Reset Button

Using a gentle but firm pressure, press and hold the reset button for approximately 5-10 seconds. This duration may vary depending on the manufacturer, so consult your user manual for clarification.

Holding the button down effectively resets the internal components of the fireplace.

4. Powering On the Electric Fireplace

After releasing the reset button, proceed to power on the electric fireplace. Use either the remote control or the power button on the control panel to turn the unit back on.

You should hear a click or an indicator light, signaling that the fireplace is receiving power.

If the reset button method doesn’t resolve the problem, there may be underlying issues that require professional attention. Contact the manufacturer’s customer support or a certified technician for further assistance.

Reset Electric Fireplace Using Unplug and Plug Technique

To reset an electric fireplace using the unplug and plug technique, follow these steps:

  1. Turn Off the Fireplace: Ensure that the electric fireplace is turned off. If it has a remote control, make sure the remote is also off.
  2. Unplug the Fireplace: Locate the power cord of the electric fireplace. It is typically found at the back or bottom of the unit. Gently pull the plug from the electrical outlet.
  3. Wait a Few Minutes: Leave the fireplace unplugged for at least 5-10 minutes. This allows any residual power to dissipate and gives the electronics a chance to reset.
  4. Inspect for Damage: While waiting, take a moment to inspect the power cord for any signs of damage. If you notice any frayed wires or exposed insulation, do not attempt to plug it back in. Contact the manufacturer or a qualified electrician for assistance.
  5. Plug In the Fireplace: After waiting, plug the fireplace back into the electrical outlet securely. Ensure it is snug and properly inserted.
  6. Turn On the Fireplace: Use the power button on the unit itself or the remote control to turn the fireplace back on.

Change Setting To Default Manually

To change the settings of an electric fireplace back to their default values manually using the product manual, you’ll need to follow these general steps. Keep in mind that specific instructions may vary depending on the make and model of your electric fireplace, so refer to the manual for your specific unit for the most accurate information:

  1. Identify Default Settings: Look for a section in the manual that outlines the default settings for your electric fireplace. This information is usually provided to help users reset the unit if they have made adjustments.
  2. Power Off the Fireplace: Turn off the electric fireplace using the power button or unplugging it from the electrical outlet. This ensures that you can make changes safely.
  3. Access the Control Panel or Remote: If your electric fireplace has a control panel on the unit, locate it. If you use a remote control, make sure it’s nearby.
  4. Reset to Default Settings: Follow the instructions in the manual to reset the settings to their default values. Note down the values of each setting and change is one by one carefully.
  5. Verify Settings: After following the steps provided in the manual, verify that the settings have been reset to their default values.
  6. Power On the Fireplace: Turn the electric fireplace back on using the power button or plugging it back into the electrical outlet.
  7. Test the Settings: Test the various functions of the electric fireplace (such as heat, flame effects, brightness, etc.) to ensure they have returned to the default values specified in the manual.
Electric fireplace

Related Posts:

Affiliate Disclosure: Fireplaceadviser.com is a participant in the Amazon Services LLC Associates Program. We may earn a commission when you click on certain links on this site and purchase.

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top